fc811 spec

Fiber-cut switch FC811 is a low cost 8 port (1x1), no latency, L1 optical switch for simulating fiber-cuts; automating fiber-cut scenarios in manufacturing QA or engineering test labs. You can either use 8 single fibers or 4 duplex fibers (Tx/Rx combo) to simulate fiber cut scenarios. The automation of fiber-cut failures saves lot of regression effort and time involved in testing software/hardware components which detect these failures and act upon. Typical application involves SONET/SDH/ATM/DWDM/Ethernet/Fibre Channel switches which uses optical uplinks with Automatic Protection Switching (APS) or similar protection and restoration features.

FC811 Specifications
Wavelength range FC811-SM
  1280-1625 nm
   850/1310 nm
Insertion Loss (excluding connectors) ≤ 1.0 dB
Wavelength Dependent Loss (WDL) ≤ 0.15 dB
Polarization Dependent Loss (PDL) ≤ 0.1 dB
Return Loss > 55 dB
Extinction Ratio > 60 dB
Switching Time ≤ 10 ms
Repeatability ± 0.02 dB
Operating Temperature range -5 ~ 70 °C for SM  ~-20 ~75 °C for MM
Humidity 5 ~ 85 % RH
Durability > 10 Million Cycles
Form Factor 1U rackmountable, 13 inch deep
Power Supply 100-240V AC, 50/60Hz
Optical Interface 8x Duplex SC/LC connectors
Network Interface 1x 10/100 Mbps RJ45 Ethernet
Serial Interface 1x RS232 DB9 Male connector

For more details click here to download User's Manual