The VFC1011-MM is a Multi-mode 10 port fiber-cut switch based on VOAs (variable optical attenuators). It allows configuring the switching delay and the attenuation to simulate real-world fiber-cut scenarios.
| VFC1011-MM Specifications |
| Wavelength |
850/1310 nm
|
| Insertion Loss (excluding connectors) |
≤ 1.0 dB |
|
Wavelength Dependent Loss (WDL) |
≤ 0.15 dB |
| Polarization Dependent Loss (PDL) |
≤ 0.1 dB |
| Return Loss |
> 55 dB |
| Attenuation Dynamic Range |
> 30 dB |
| Attenuation Resolution |
256 steps |
| Switching Time |
≤ 5ms |
| Max Repetition Rate |
20 Hz |
| Operating Temperature range |
-5 ~ 70 °C |
| Relative Humidity Range |
5 ~ 85 % RH |
| Durability |
> 10 Million Cycles |
| Form Factor |
1U rackmountable, 5 inch deep |
| Power Supply |
100-240V AC, 50/60Hz |
| Power Consumption |
< 7 Watts |
| Display |
1 inch OLED |
| Optical Interface |
10x Duplex Multi-mode SC/LC connectors |
| Network Interface |
1x 10/100 Mbps RJ45 Ethernet |
| Peripheral Interface |
1x USB for WiFi Dongle or external Flash |
| Console/Debug Interface |
1x USB micro connector (Baud 115200) |
